Unloading: Cutting the acrylic sheet with a cutting machine. This requires the size of the acrylic product to be accurately opened to avoid material waste.

Engraving: After the material is finished, the acrylic sheet is initially engraved according to the shape requirements of the acrylic product, and carved into different shapes.

Trimming: After the material is opened or engraved, the edge of the acrylic sheet is rough, so the acrylic trimming process is used, and the trimming machine is used.

Punching: This process is based on the needs of acrylic products. Some acrylic products have small round holes. In this step, the punching process is used.

Polishing: After the material is opened, engraved and perforated, the edges are rough and easy to scratch. Therefore, the polishing process is used. The polishing is also divided into grinding wheel polishing, cloth wheel polishing and fire polishing. Different polishing methods are required depending on the product. . The specific method of distinguishing the polishing process of acrylic products.

Tear paper: The tearing process is a step before the silk screen and hot bending process. Because the acrylic sheet will have a protective paper after it leaves the factory, the sticker attached to the acrylic sheet must be removed before silk screen printing and hot bending.

https://www.pgacrylic.com/